Filter
Top Products
Entering Symbols
You can use character codes to enter symbols. See Appendix B
for a list of symbols and their corresponding character codes.
To enter a character code
1. Press P.
2. Use the data entry keys to enter the three-digit character
code. For example, enter 179 for ¥ .
3. Press E.
Using Bar Code 128
You can enter function codes 1 - 4 for code 128 bar codes.
These codes only function as code 128 data. They do not print if
you enter them as data anywhere else. See the Code 128 table
in Appendix B for the function code you want.
To enter a function code
1. Press P.
2. Use the data entry keys to enter the function code you want.
3. Press E.
Entering and Changing Data
When you need to enter data, the screen shows a prompt with an
underscore for each character you can enter.
DEPT:
JUNIOR _ _ _
For example, this screen shows you can enter up to three
characters before pressing E. If you try to enter more than
three characters, the printer does not accept the data. Your entry
is not accepted until you press E.
Printing 8-11