Filter
Top Products
Communication Values ––––––––––––––––––––––––––––––––––––––
In order for your printer to communicate with your host, you
must make sure the communication values are set to the same
values. Here are the default values with which the printer is
shipped:
✦ Baud: 9600
✦ Word Length: 8-bit data frame
✦ Stop Bits: 1-stop bit
✦ Parity: none
✦ Flow Control: DTR
To change the printer’s communication values, contact your
company’s host support person or see the
MPCLII Packet
Reference Manual
.
Chapter 1. Installation
1-5