Filter
Top Products
Connecting the Power Cord ––––––––––––––––––––––––––––––––––
Before you plug or unplug the power cord, turn the printer off.
To connect the power cord:
1. Turn the printer off. (I) indicates on and (O) indicates off.
2. Turn the printer as shown.
3. Insert the power cord into the socket as shown below.
4. Plug the other end of the power cord into a grounded
electrical outlet of the correct voltage.
WARNING: The power supply cord is intended to serve as the
disconnect device. The socket-outlet shall be
near the equipment and shall be easily accessible.
Power Cord
Socket
9494 Operator’s Handbook
1-2