Filter
Top Products
3-4 NPort Server Pro User’s Manual
8. Use the keyboard arrow keys to position the cursor over the first digit of the IP address.
9. Type in the correct IP address and then press Enter to accept this value.
10. Press ESC to return to the main menu, and then select Restart to activate the change.
DHCP Server
This section applies if you are using your Windows NT host as a DHCP server. This type of server is
set up to provide IP addresses for new devices as they log onto a network. As the operation of NPort
Server Pro requires a fixed IP address, we strongly recommend that you establish an IP reservation
list in DHCP in order to maintain fixed IP assignments based on the server’s MAC address. NPort
Server Pro’s unique MAC address, which is required when setting up the DHCP server, can be found
on the server’s back panel.
. Note: For NPort Server pro, the DHCP setting is ENABLED by default.
1. Access DHCP Manager from the Windows NT desktop by clicking on
Start à Programs à Administrative Tools à DHCP Manager.