Filter
Top Products
Setting Up Custom
NPort Server Pro User’s Manual 6-17
Steps for configuring the server’s password:
1. Select the Password tab in the Server
Properties window.
2. Enter the current password and new
password as indicated.
3. Check the Auto Save Password on this
computer box if you want Windows
NT/95/98 to remember your password.
. Note: If you do not check the Auto
Save Password on this computer box,
you will need to enter the correct
password each time you want to view
Server Properties.
Server Properties—Transmission
The Transmission page allows the user to set the Transmission Mode and Tx FIFO options for each
of NPort Server Pro’s ports.
Transmission Mode
Select Hi -Performance to use buffering technology to accelerate data writing. This allows your
communication software to reach maximum data throughput when transmitting large amounts of data.
The driver will notify the user that the transmission is completed when the output data length is lower
than the LOW WATER setting.
Classical Mode lets the port behave like a generic COM port. Transmission of small data packets is
more precise and reliable. In this case, the driver will notify the user that the transmission is complete
when all data has been transmitted.