Filter
Top Products
Setting Up Single-Host
NPort Server Pro User’s Manual 4-13
Changing the COM Name of One Port
1. Click on the server name whose port you would
like to modify.
2. Click on the port, in the right info box, whose
COM name you would like to modify.
3. Choose Map Port from the Port menu, or click on
the toolbar Map Port icon to activate the function.
4. Select the COM name that the port will be mapped
to.
5. Click OK to activate the change.
Un-Mapping a Port
If you do not need to use a port any more, you may use the UnMap Port function to remove it from
your Windows NT/95/98 operating system.
1. Click on the port (in the right info box) that you
want to remove.
2. Choose UnMap Port from the Port menu, or click
on the toolbar Unmap Port icon
. Note: The screen at the right shows the display after un-
mapping ports 3 and 5.
Configuring Server Properties
The Server Properties function can be used to change the server’s name, password, and transmission
parameters. Choose Server Properties from the Server menu, or click on the toolbar Server
Properties icon to open the Server Properties window.