Filter
Top Products
Setting Up Multi-Host
NPort Server Pro User’s Manual 5-15
4. Click on Open and then wait until you see an “upgrade completed” message. The
server will restart automatically.
. Note: When using this procedure, only the selected server’s firmware is upgraded. If you
know that new NPort Pro Manager software has been released, it is recommended that
you uninstall the old NPort Pro Manager program from your NT/95/98 host’s hard
drive, and then install the new one.
Configuring Server Properties
The Server Properties function can be used to change the server’s name, password, and transmission
parameters. Choose Server Properties from the Server menu, or click on the toolbar Server
Properties icon to start the function.
Server Properties—General
You may modify the Server Name, Server
IP, and Netmask by using the toolbar
Properties function.
1. Select the General tab in the Server
Properties window.
2. Modify the Server Name, Server
IP, and Netmask, as needed.
3. Select Enable or Disable, for DHCP,
depending on whether or not you are
using a DHCP server.