Filter
Top Products
57
User Guide
S36 Bit-Mapped Options Status (Indicates the status of command
Options.) LAPM Failure Control Default: 7
Bits 0-2 This option indicates what should happen upon a LAPM failure.
These fallback options are initiated immediately upon connection if S48 =
128. If an invalid number is entered, the number is accepted into the
register, but S36 will act as it the default value has been entered.
0 = Modem Disconnects.
1 = Modem stays on-line and a Direct mode
connection is established.
2 = Reserved
3 = Modem stays on-line and a Normal
mode connection is established.
4 = An MNP connection is attempted and if
it fails, the modem disconnects
5 = An MNP connection is attempted and if
it fails, a Direct mode connection
is established
6 = Reserved
7 = An MNP connection is attempted and if
it fails, a Normal modem connection
is established (Default)
Bits 3-7 Reserved
S37 Bit-Mapped Options Status { ZDX only }
(Indicates the status of command Options.)
Desired DTE Connection Speed Default: 0
When the Nn command is issued or the S37 register value is modified, the
+MS command subparameters are updated to reflect the speed and the
modulation specified bit the S37 value. For Example: