Filter
Top Products
MultiModemII User Guide
6
Introduction
We know you are eager to get your MultiModemII up and running, so we’ll show
you step-by-step how to set it up, check it out, and make your first calls.
What You Will Need
Before starting, please make sure you have everything you need:
We supply
An MT5600BA or MT5600 BL modem
A wall mount transformer
One (MT5600BA) or three (MT5600BL) modular telephone cables
Trio communications software
A Quick Start Guide
This User Guide on disk
An installation disk
You supply
A computer with an unused serial port
A shielded RS-232 serial cable with a male DB-25 connector on one end and a
connector to match your computer’s serial port on the other end
A nearby AC power outlet
A nearby telephone line jack
A nearby leased line jack or terminals (optional)
Safety Warnings
• Use this product only with UL- and CUL-listed computers.
• To reduce the risk of fire, use only 26 AWG or larger telephone wiring.
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the jack is specifically de-
signed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) during an electrical storm;
there is a risk of electrical shock from lightning.
• Do not use a telephone in the vicinity of a gas leak.