Filter
Top Products
MultiVOIP User Guide Technical Configuration (Digital Voips)
148
The Supplementary Services fields are described in the tables below.
Supplementary Services Parameter Definitions
Field Name Values Description
Select
Channel
1-2 (210);
1-4 (410);
1-8 (810)
The channel to be configured is
selected here.
Call
Transfer
Enable
Y/N Select to enable the Call Transfer
function in the voip unit.
This is a “blind” transfer and the
sequence of events is as follows:
Callers A and B are having a
conversation.
Caller A wants to put B into contact
with C.
Caller A dials call transfer sequence.
Caller A hears dial tone and dials
number for caller C.
Caller A gets disconnected while
Caller B gets connected to caller C.
Transfer
Sequence
any
phone
keypad
character
The numbers and/or symbols that the
caller must press on the phone keypad to
initiate a call transfer.
The call-transfer sequence can be 1 to 4
characters in length using any
combination of digits or characters
(* or #).
The sequences for call transfer, call
hold, and call waiting can be from 1
to 4 digits in length consisting of any
combination of digits 1234567890*#.