Filter
Top Products
MultiVOIP User Guide Technical Configuration (Analog)
190
FXS Loop Start Parameters. The parameters applicable to FXS Loop
Start are shown in the figure below and described in the table that
follows.
FXS Loop Start Interface: Parameter Definitions
Field Name Values Description
FXS Loop Start Y/N Enables FXS Loop Start
interface type.
Inter Digit
Timer
integer values
in seconds
This is the length of time that
the MultiVOIP will wait
between digits. When the time
expires, the MultiVOIP will
look in the phonebook for the
number entered.
Default = 2.