Filter
Top Products
MultiVOIP User Guide T1 PhoneBook Configuration
249
Advanced
button
-- Gives access to secondary
screen where an Alternate IP
Route can be specified for
backup or redundancy of
signal paths. See discussion
on next page.
Clicking on the Advanced button brings up the Alternate Routing secondary screen.
This feature provides an alternate path for calls if the primary IP network cannot carry
the traffic. Often in cases of failure, call traffic is temporarily diverted into the PSTN.
However, this feature could also be used to divert traffic to a redundant (backup) unit
in case one voip unit fails. The user must specify the IP address of the alternate route
for each destination pattern entry in the Outbound Phonebook.