Filter
Top Products
24
Chapter 3 - Software Installation and Configuration
15. The Check List dialog box displays summarizing your configuration selections. Ensure that all
values have been correctly entered. If you find an incorrect setting, click Back to return to the
screen containing the error and correct it. When complete, click Next to return to the Check List
dialog box.
Click Finish to complete the configuration.
16. The Note dialog box displays indicating that you have completed the Setup Wizard.
Read the “IMPORTANT!” information contained in the dialog box. Choose Run Monitor
(recommended), Run Manager or Exit.
Testing your Connection
When you select Run Monitor, the RouteFinder Monitor program loads.
1. To test your current settings, select Test Connection. Select Connect Port 1 to test the WAN
port. Select Connect Port 2 to test the serial async port. The monitor activity will appear in the
display window. Refer to the RouteFinder Monitor chapter in this User Guide for additional
information about the monitoring capabilities of the RF802EW.
2. After successfully using the Test Connection option in Run Monitor, refer to the LAN Client
Settings chapter of this User Guide to continue with your installation by configuring your LAN
workstations.
Note: If a problem occurs while testing your connection, or you need to configure more advanced
options for your RouteFinder, use RouteFinder Manager by selecting Programs | RouteFinder
Manager | RouteFinder Manager.