Filter
Top Products
2-15Ge t t I n G s t a r t e d
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Ge t t I n G s t a r t e d
Loading paper into the bypass tray
When you need to use a paper size that is not currently loaded in the paper cassette, or
when you want to print on a envelope, transparency film or custom sized paper, use the
bypass tray.
NOTE: Only use print media specified under “Acceptable paper size” on page 2-12 to avoid
paper jams and print quality problems.
1
Open the bypass tray on the right side of your machine. Unfold the paper support
extension.
2
To set the paper, 1) raise the flapper release lever 2) load paper until it comes to a stop.
3
1) Adjust the paper guides to fit the paper, 2) then lower the flapper release lever.