Filter
Top Products
78 _Machine status and advanced setup
OPTIONAL SERVICE
When you want to add the optional features for this machine, you have to
install the optional kit and then set the machine to enable and activate those
features. Follow the next steps to enable those features.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
password and press OK.
3. Press the Setup tab > Optional Service.
DOCUMENT BOX MANAGEMENT
You can set a person performing deletion of the public boxes in
User Box
.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
password and press OK.
3. Press the Setup tab > Document Box Management.
Authentication
Mode
(Continue)
Foreign Device
Interface
(Continue)
• Internal Credits: It is used
when you cancel the job or
when the job is cancelled by the
device due to insufficient credits
(coin) or is canceled by user’s
request. If you select Enable,
the machine deposits a credit
equal to the number of sheets
that did not print out correctly,
then it prints next job for free
(for the amount deposited).
With Disable, even if you
cancel the printing job, the
machine includes jammed
paper in the count and the cost
of printing.
• Image Counter: Depends on
whether the machine counts
blank white pages.
Change Admin. Password You can change the password for
the Admin Setting authentication.
OPTION DESCRIPTION
Copy Enables or disables the Copy menu from the main
screen.
Analog Fax After installing the fax kit, select this option
Enable
to use this machine as a fax machine.
Scan to Email Enables or disables the Scan to Email menu from
the scan screen.
NetScan Set
Enable
to activate the scanning and sending it
via network.
OPTION OPTION DESCRIPTION
Scan to SMB Enables or disables the Scan to SMB option from
the scan screen.
Scan to FTP Enables or disables the Scan to FTP option from
the scan screen.
On Demand Image
Overwrite
You can set the machine to delete previous job
information on HDD as you store new job
information. Set this option to
Enable
, go to the
General tab > On Demand Overwrite, press
Start in the display to start the overwriting job.
Immediate Image
Overwrite
If you select
Enable
, the machine renews the HDD
memory when you save new job on it.
OPTION DESCRIPTION
Public Box
Deletion
If you set this option to Administrators only, only
the administrator can delete the publicly stored
boxes in
User Box
, because the machine will asks
the password of administrator.
OPTION DESCRIPTION