Filter
Top Products
English
2. CONNECTING THE eClient
11
2-2. Connecting the eClient
NOTE
• Before connecting the eClient, confirm the following:
• The eClient is turned off.
• The WTS is turned on.
• Connect the peripherals to the appropriate connectors of the unit.
1. In case of connecting the WTS through LAN:
Connect the eClient to the network with an ethernet cable.
In case of a dial-up or dial-in connection (531L/531LT-GR only):
Connect the eClient to a modem or a modem card.
2. Plug a keyboard and a mouse into the eClient. If using other devices,
please connect them to the appropriate connectors.
If using a touch panel, a mouse should not be connected (531LT-GR only).
Modem
Card
Keyboard
Mouse
Printer
Power Cord
Network