Filter
Top Products
12
2. Installation
4 The <Display Setup> menu will appear in the middle of the screen. Press the
buttons to select "Dual Display" and then press .
Displaying 10-bit color signals
10-bit color signals can be displayed.
How to set
1 Connect the [SIGNAL1] signal input connector and the computer using the
[DD200DL-BK] signal cable.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
Connectors on the PC Signal cable Connectors on the monitor
Signal cable (DD200DL-BK)
SIGNAL1
2 Hold down the button and press the button.
3 The <Display Setup> menu will appear in the middle of the screen. Press the
buttons to select "Single Display" and then press .
4 The <Signal Selection> menu will appear. Press the buttons to select
"Single Link/10bit", and press
.