Filter
Top Products
2. Installation
13
2-3. Making Use of USB (Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or
another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected.
Required system environment
1. PC equipped with USB ports or another USB hub connected to the USB compliant PC
2. Windows 2000/XP/Vista /7 or Mac OS 9.2.2 and Mac OS X 10.2 or later
3. USB Cable (MD-C93, enclosed)
NOTE
• The USB hub function may not work properly depending on the PC or peripherals. Please consult the manufacturer of
each device about the USB support.
• Using the USB Rev. 2.0 compatible PC or peripherals is recommended.
• If the monitor is in the power saving mode, or if the monitor is connected to the power outlet with the monitor turned
off, all the devices connected to the USB ports (upstream and downstream) work. Therefore, power consumption of the
monitor varies with connected devices even in the power saving mode.
Connecting to the USB HUB
1 Connect the monitor to the PC with the signal cable rst, then turn on the PC.
2 Connect the upstream port of the monitor to the downstream port of the
USBcompliant PC or another hub by using the USB cable.
After connecting the USB cable, the USB function can be set up automatically.
3 After setting up, the monitor's USB hub is available for connecting USB
compliantperipherals to the downstream ports of the monitor.
Upstream
Downstreem