Filter
Top Products
22
2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER
Uniformity
“Uniformity” function adjusts the bright/white
uniformity of the screen influenced by the earth
magnetism or other environmental factors. There are
two adjustment modes in the “Uniformity” function;
“Standard” and “Custom”. If some color patches
remain in the corners after the standard adjustment
(selection of the best uniformity point), use the
“Custom” for finer adjustments.
Standard
1) Select the “Uniformity” function. At “Standard”,
the icons, N, NE, E, SE, S, SW, W, and NW
represent a broad direction the screen is facing.
Select the direction the screen is facing until the
imbalance of brightness/whiteness over the entire
screen will be minimized. Default setting is “no
gauss”. Press enter as you finish.
2) To register the adjustment, select the “Save” icon
and then press the ENTER key. If the settings are
not saved, all adjustments will be lost.
• Choosing the direction at the “Standard”
adjustment may not offer its best uniformity
because of other environmental effects.