Filter
Top Products
32
Chapter 3 Connecting Cables
●
To switch the input signal
The input signal switches each time is pressed.
When the signal is switched, the active input port name appears at the top right
corner of the screen.
●
To set input signal selection [Input Signal]
Setting Function
Auto The monitor recognizes the connector through which
PC signals are input.
When a PC is turned off or enters the powersaving
mode, the monitor automatically displays another
signal.
Manual
The monitor detects only the PC’s signals currently
displaying automatically. Select an active input signal
with .
[Input signal setting]
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Input Signal> from the <Others> menu, and press .
The <Input Signal> menu appears.
(3) Select “Auto” or “Manual” with or , and press .
The setting is completed.
NOTE
• When “Auto” is selected for
<InputSignal>, the monitor's power-
saving function works only when all
PCs are in the power-saving mode.
NOTE
• When “Auto” is selected for
<InputSignal>, the monitor's power-
saving function works only when all
PCs are in the power-saving mode.