Filter
Top Products
Chapter 5 Analog Output
NI 6232/6233 User Manual 5-6 ni.com
Figure 5-3. Analog Output Timing Options
NI 6232/6233 devices feature the following AO (waveform generation)
timing signals.
• AO Start Trigger Signal
• AO Pause Trigger Signal
• AO Sample Clock Signal
• AO Sample Clock Timebase Signal
AO Start Trigger Signal
Use the AO Start Trigger (ao/StartTrigger) signal to initiate a waveform
generation. If you do not use triggers, you can begin a generation with a
software command.
Using a Digital Source
To use ao/StartTrigger, specify a source and an edge. The source can be one
of the following signals:
•A software pulse
• Input PFI <0..5>
•RTSI<0..7>
• ai/ReferenceTrigger
• ai/StartTrigger
•PXI_STAR
PFI, RTSI
PXI_STAR
20 MHz Timebase
100 kHz Timebase
PXI_CLK10
Programmable
Clock
Divider
ao/Sample
Clock
Timebase
PFI, RTSI
PXI_STAR
Ctr
n
Internal Output
ao/Sample
Clock