National Instruments NI 8171 Series Network Card User Manual


 
Chapter 5 Troubleshooting
© National Instruments Corporation 5-3 NI 8171 Series User Manual
Icant change the display on the NI 8171 series controller from
640 × 480to800× 600. Whatswrong?
If you are using aPXI-1020 or PXI-1025 chassis, theintegrated LCD limits
the maximum resolution displayed.
If you are not using a PXI-1020 or PXI-1025 chassis, be sure the video
driver is installed. If it is not, see the
Drivers.txt
file on the hard drive
or recovery CD-ROM.
What if there is a power loss during a BIOS update?
Create a crisis recovery disk. Unzip
crisis.zip
on the recovery CD.
Insert a blank floppy disk in the PC. Run
crisis.exe
(or
Wincrisis.exe
in Windows). Follow the instructions to create the BIOS
recovery floppy disk. Insert the disk in the NI 8175 or NI 8176 floppy drive
and power on the controller. The controller installs the BIOS from the disk.