Filter
Top Products
NEC 1765 Administration Software for TCP/IP 5–41
5 NEC 1765 Administration Software
LAN Card Parameters Dialog Box
Open the LAN Card Parameters dialog box by selecting
the LAN Card menu option on the Configure menu or
by selecting the LAN Card button in the Printer
Administration window.
The LAN Card Parameters dialog box includes the
following information.
LAN Card Type: The LAN card’s hardware type.
MAC Address: The LAN card’s personal network
address.
Printer Name: The printer can be renamed. You may
use any combination of upper-case alphanumeric
characters, hyphens (-), and underscores (_) in the
printer name.
Firmware Version: The LAN card’s firmware
version.
Serial Number: The serial number of the Silentwriter
LAN card.
Default Name: The name of the LAN card set at the
factory. The default printer name is “NP_” followed
by six digits. An example name is NP_901715.
Printer Polling Rate: Sets the frequency in tenths of a
second with which the LAN card requests new
status and configuration information from the
printer. The range is 20 to 255 tenths of a second and
the default is 50 tenths of a second. Setting printer
access too frequently will affect the printer’s
processing performance. Use the default setting
unless unavoidable. Setting the value to 0 will
prevent updating.
Busy Timeout: Sets the wait time in seconds before a
timeout when the server fails to respond. The range
is 15 to 255 seconds and the default is 15 seconds.
Saves changes and closes dialog box
Discards changes and closes dialog box
Opens online help about this dialog box