Filter
Top Products
Configuring Your System 3-17
SCSI Device Settings Submenu
Feature Choices or Display Only Description Your Setting
Disconnects OK
Yes
No
Specify whether the
disconnection of SCSI devices
from the SCSI bus is enabled
or disabled.
Check Parity
Yes
No
Specify whether the parity
check is provided or is not
provided.
Enable LUNs
Yes
No
Specify whether more than one
LUN number are given to SCSI
ID.
Enable PPR
Yes
No
Factory set. Do not change.
Enable Device
Yes
No
Factory set. Do not change.
Negotiate Wide
Yes
No
Specify whether the wide (32
bits) transfer is enabled or
disabled.
Negotiate
Synchronous
Yes
No
Specify whether the
synchronous transfer is
enabled or disabled.
Tagged Queuing
Yes
No
Factory set. Do not change.
Sync Offset
00, 02, 04, 06, 08, 10, 12, 14,
16, 18, 20, 22, 24
Select the proper offset value in
synchronous transfer.
Transfer Rate
(Mbytes/sec)
9 160 (Ultra3 SCSI)
10
80 (LVD SCSI)
12 40 (Ultra SCSI)
25 20 (Fast SCSI)
Sync Period
40 12.5
Select the proper speed in
synchronous transfer.
Exec Throttle
1, 4, 8, 16, 32, 64, 128, 255
Factory set. Do not change.