Filter
Top Products
- 18 -
If you click the downward arrow at the right end of the tab, then a menu item for changing the
priorities of tasks (Settings) and those for starting tasks appear.
Settings menu
Rebuild Rate Set the priority of rebuild processing. The default is Medium.
Logical Drive Initialization
Rate
Set the priority of logical drive initialization. The default is Medium.
Media Patrol Rate Set the priority of media patrol. The default is Low.
Redundancy Check Rate Set the priority of redundancy check. The default is Medium.
Migration Rate Set the priority of expansion. The default is Low.
PDM Rate Set the priority of PDM. The default is Medium.
Transition Rate Set the priority of transition. The default is Medium.
Reassigned Block
Threshold
Set the reassigned block threshold. The default is 32.
Error Block Threshold Set the error block threshold. The default is 32.
Enable Media Patrol Set whether the media patrol is enabled or not. The default is
[Enable].
Enable Auto Rebuild Set whether the auto rebuild is enabled or not. The default is [Enable].
When you change a setting value but want to return it to the value at the screen display, click
[Reset]. To change a setting value and enable the new value, click [Submit]. To return to the
recommended default value (set in the above screen image), first click [Default] and then
[Submit].