Filter
Top Products
- 3 -
2. Installation/Uninstallation
2.1 Operation Environment for WebPAM PRO
The following operation environment is required for the proper operation of WebPAM PRO.
- Hardware
NEC EXPRESS5800 server available for the “N8103-105 Disk Array Controller (SAS)”
- Software
RHEL AS/ES 4 Update 5 or later
ML4SP2 or later
IMPORTANT:
Only users authorized as root are permitted to install
and uninstall WebPAM PRO.
If you have used Web-based Promise Array Manager
(WebPAM, N8103-101/103 management utility), be
sure to uninstall WebPAM before installing WebPAM
PRO. You cannot use WebPAM PRO with WebPAM.
For uninstalling WebPAM, see "Web-based Promise
Array Manager User’s Guide (Linux Version)”.
2.2 Installing WebPAM PRO
1. Untar the WebPAM PRO installation module.
Ex.) As the WebPAM PRO installation module is “WPPInst-1.00.tar.gz”:
# tar -zxvf WPPInst-1.00.tar.gz
2. Execute the WebPAM PRO installation script as follows:
# ./WPPInst.sh –e
3. Check that WebPAM PRO has been successfully installed.
WPP: Installation completed. Please reboot the system.
After installation completed, restart the system.