Filter
Top Products
- 32 -
The following options can be set.
Redundancy Determines whether redundant logical drives are created or not.
If you check the checkbox, RAID1, RAID5 or RAID10 is created
depending on the number of connected HDDs available for creating
logical drives.
If you do not check the checkbox, RAID0 is created.
Note: If only a single HDD available for creating logical drives is
connected, RAID0 is created despite whether the checkbox is
checked or not.
Capacity If you check the checkbox, the maximum capacity available for the
creation is set.
Performance If you check the checkbox, the maximum read/write performance is
set.
Number of Logical
Drives
Enter the number of logical drives to be created.
Application Type Select an application type suit to your purpose out of the following
types:
• File Server
• Video Stream
• Transaction Data
• Transaction Log
• Other
Each option sets the configuration (stripe size, write policy, etc.)
suitable for your purpose, however, if you want to do more detailed
settings, create an array and logical drive with Advanced
Configuration wizard. (See “3.6.3 Advanced Configuration”.)
Automatic Update Clicking the Update button allows the automatic update to be
reflected on the Logical Drives field below this field. If you check the
checkbox, the automatic update is automatically reflected on the
Logical Drives field only by changing the value of "Number of Logical
Drives."