Filter
Top Products
Using the System Drives and Bays 5-13
2.
Turn the system over and locate the screw on the memory bay cover.
Memory bay cover and screw
A
– Memory Bay Cover
B
– Screw
3.
Remove the screw and lift off the memory bay cover.
4.
If you need to remove a module for the upgrade, remove it as follows (see the
following figure).
Before handling any internal components, discharge static
electricity from yourself and your clothing by touching a nearby unpainted metal surface.
Press the locking tabs away from the sides of the module until the module
pops up at an angle.
Pull the memory module out of the slot along the angle.