Filter
Top Products
1-6 Introducing the NEC Versa
Control panel
A
– Personal Code Button 1
E
– Personal Code Enter Button
B
– Personal Code Button 2
F
– Shortcut Button
C
– Personal Code Button 3
G
– Power Button
D
– Personal Code Button 4
H
– Shortcut Button
Security and Personal Code Buttons
Some systems have Personal Code Setting buttons. Use the buttons to set, enter,
change, or cancel a personal security code. See “Personal Code Setting Utility” in
Chapter 4 for more information.
Power Button
Note
If you are unable to power off the system, use the power override. Press the
Power button and hold it in place approximately 4 to 5 seconds until the system powers
off.
The Power button is a “smart” switch. It recognizes when the system is in a
Windows 98 or Windows 2000 Standby mode, if the BIOS parameter “Power Switch”
is set to “Sleep.” If the system is in Standby mode, you cannot power off until you
press the Power button to resume operation.
Put the unit in Standby mode when you need to be away from your system for a short
period of time and want to return to where you left off. Standby mode shuts down all
devices in the system while retaining data and system status.
In Windows 98 and Windows 2000, go to Start, Shutdown, Standby to put your
system into Standby mode.