Filter
Top Products
English-20
Input Setting Video Band Width: Reduce the visual “noise” level of the input signal.
(Analog input only) The video band width settings range from 0-7, with 0 having no correction and 7 having
the most noise correction. Press “Left” or “Right” to select.
Sync Threshold: Adjusts the slice level of a synchronization signal.
Press “SELECT” to move the adjustment menu. Adjusts the sensitivity of the separate or
composite input signals.
Try this option if the FINE adjustment does not successfully eliminate the noise.
SOG Threshold: Adjusts the sensitivity of the Sync On Green input signals.
Adjusts the slice level when separating synchronization from sync On Green signal input.
Press “Left” or “Right” to select.
Clamp position: Operating your monitor at a non-standard timing may cause images to
appear darker than normal or have color distortion. Use of the Clamp position control will
adjust images to their normal state.
TagA CALIBRATION Selects the Calibration mode (page 21).
SELF TEST MODE Displays an all white screen. Used for copy calibration.
FAN CONTROL Cooling fans are implemented to reduce the internal temperature of the display.
AUTO: Temperature controlled fan operation.
ON: Permanent fan operation. It is strongly recommended to set ON when the monitor is
being used at high altitudes.
TEMPERATURE Current internal temperature is shown in degrees (C).
BACKLIGHT The estimated remaining lifetime of the display backlight is indicated here. Backlight
LIFETIME lifetime depends mainly on the desired calibrated settings. The lower the calibrated
setting, the longer the backlight’s estimated lifetime.
TagB Information Provides information about the current display resolution Technical data, including the
preset timing currently being used and the horizontal and vertical frequencies is also
displayed.