Filter
Top Products
English-24
OSD Setting
PICTURE BRIGHTNESS Adjusts the overall image and background brightness. Press + or - to adjust.
CONTRAST Adjusts the image brightness in relationship to the background. Press + or - to adjust.
Note: The sRGB picture mode is standard and cannot be changed.
SHARPNESS Adjusts the crispness of the image. Press + or - to adjust.
BLACK LEVEL Adjusts the image brightness in relationship to the background. Press + or - to adjust.
TINT* Adjusts the tint of the screen. Press + or - to adjust.
INPUT HDMI, DVD/HD, VIDEO, TV only
COLOR* Adjusts the color depth of the screen. Press + or - to adjust.
INPUT HDMI, DVD/HD, VIDEO, TV only
COLOR TEMPERATURE Adjusts the color temperature of the entire screen. A low color temperature will make the
screen reddish. A high color temperature will make the screen bluish.
Note: The sRGB picture mode is set to a predefined 6500 K standard and cannot be
changed.
COLOR CONTROL Adjusts the levels of the Red, Yellow, Green, Cyan, Blue, Magenta and Saturation.
INPUT DVI, VGA, RGB/HV, HDMI only Note: The sRGB picture mode is standard and cannot be changed.
GAMMA SELECTION Select a display gamma for best picture quality.
NATIVE Gamma correction is handled by the LCD panel.
2.2 Typical display gamma for use with a PC.
2.4 Good for video (TV, DVD, etc.)
S GAMMA Special gamma for certain types of movies. Raises the dark parts and lowers the light parts
of the image. (S-Curve)
DICOM SIM. DICOM GSDF curve simulated for LCD type.
PROGRAMMABLE A programmable gamma curve can be loaded using NEC software.
ADAPTIVE CONTRAST* Sets the level of adjustment for dynamic contrast.
INPUT HDMI, DVD/HD, VIDEO, TV only
OFF
MID
HIGH
MOVIE SETTINGS*
NOISE REDUCTION Adjusts the amount of noise reduction. Press + or - to adjust.
INPUT TV, VIDEO only
FILM MODE Selects Film mode.
INPUT HDMI, DVD/HD, VIDEO, TV only
PICTURE RESET Resets the following settings within the PICTURE menu back to factory setting:
BRIGHTNESS, CONTRAST, SHARPNESS, BLACK LEVEL, TINT, COLOR, COLOR
TEMPERATURE, COLOR CONTROL , GAMMA SELECTION, ADAPTIVE CONTRAST,
MOVIE SETTINGS.
ADJUST AUTO SETUP Automatically adjusts screen size, H position, V position, Clock, Clock Phase, White Level,
INPUT VGA, RGB/HV only and Black Level.
AUTO ADJUST H Position, V Position and Clock Phase are adjusted automatically upon power on.
INPUT VGA, RGB/HV only
H POSITION Controls the horizontal position of the image within the Display area of the LCD.
Press + to move right. Press - to move left.
V POSITION Controls the vertical position of the image within the Display area of the LCD.
Press + to move up. Press - to move down.
CLOCK Press + to expand the width of the image on the right of the screen.
INPUT VGA, RGB/HV only Press - to narrow the width of the image on the left.
CLOCK PHASE Adjusts the visual “noise” on the image.
INPUT VGA, RGB/HV, DVD/HD only
*: The product you purchased may not have this feature.