NEC NP4100W Projector User Manual


 
8. Specifications
130
SIGNAL
RESOLUTION
(DPI)
FREQUENCY
REFRESH RATE
(KHZ)
FREQUENCY
REFRESH RATE
(HZ)
VESA D 1280 x 960 60.00 60.00
VESA D 1280 x 1024 63.98 60.02
VESA D 1400 x 1050 65.30 60.00
* VESA D 1440 x 900 55.90 60.00
* VESA D 1440 x 900 70.60 75.00
HDTV (1080p/60) 1920 x 1080 67.50 60.00 Progressive
HDTV (1080p/50) 1920 x 1080 56.25 50.00 Progressive
HDTV (1080i)(1125i) 1920 x 1080 33.75 60.00 Interlace
HDTV (1080i)(1125i) 1920 x 1080 28.13 50.00 Interlace
HDTV (720p)(750p) 1280 x 720 45.00 60.00 Progressive
HDTV (720p) 1280 x 720 37.50 50.00 Progressive
SDTV(576p)(625p) – 31.25 50.00 Progressive
SDTV (480p)(525p) 31.47 59.94 Progressive
DVD YCbCr 15.73 59.94 Interlaced
DVD YCbCr 15.63 50.00 Interlaced
Note:
Images above flagged with "D" are supported by digital signal.
Images above flagged with “*” are supported by the NP4100W only.
An image with higher or lower resolution than the projector’s native resolution
(1024 x 768: NP4100, 1280 x 800: NP4100W) will be compressed.
Under some conditions of input signals, the auto adjustment of video images may
not be available even though the AUTO ADJUST button is pressed, and manual
adjustment of "Clock" and "Phase" may be required (see page 69). Manual ad-
justment of "Clock" and "Phase" may not be available for composite sync signals
or sync on G signals.
Signals other than those specified in the table above may not be displayed cor-
rectly. If this should happen, change the refresh rate or resolution on your PC.
Refer to Display Properties help section of your PC for procedures.