Filter
Top Products
22
3. Projecting an Image (Basic Operation)
Zoom
Use the ZOOM lever to adjust the image size on the
screen.
NOTE: Rotating the ZOOM lever will cause the focus to be ad-
justed automatically.
Auto Focus
The focus sensor on the projector detects the distance to the screen and automatically adjusts the focus of an
image.
• The Auto Focus function will work when the following tasks are done:
- Turning on the power
- Changing the zoom lever
- Repositioning the projector
- Changing the projection angle
Effective auto focus range for screen 4:3
Throw distance Image size (inch)
Tele (Zoom at min.) Wide (Zoom at max.)
Minimum distance 57.1"/1.5 m 33" 40"
Maximum distance 216.5"/5.5 m 123" 149"
When the throw distance is beyond 5.5 m/216.5", it means that the focus sensor will not work correctly and
that you need to use the FOCUS button to adjust the focus manually.
NOTE: In some cases, the Auto Focus may not work correctly or the Auto Focus range can be made narrower, depending on
the environmental conditions.
The Auto Focus function will not work under the following circumstances
When using a transparent screen.
When there are objects between the focus sensor of the projector and the screen.
When moving the projector so slowly that the focus sensor cannot detect the distance to the screen.
When moving the screen, not the projector, because the focus sensor cannot detect the distance to the screen
TIP: To turn off the Auto Focus function, from the menu select [Setup - Options] → [Auto Focus] and select [Off].
•
•
•
•
S-VID
EO IN
VID
EO
IN
CO
M
PUTER
IN
PC
C
ON
T
ROL
S
OU
RC
E
AUTO
ADJ.
SELECT
ON
/S
TAN
D BY
LAMP
STATUS
POWER
FO
CUS
AC IN