Filter
Top Products
44
Setting Off Timer [Off Timer]
You can use the Off Timer feature to turn off the projector automatically at a preset time.
Eight preset times can be selected:Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00 and 16:00.
Enabling or Disabling Auto Focus [Auto Focus]
This option turns on or off the Auto Focus feature. (→ page
22)
NOTE:
When the “Auto Focus” is on, the Auto Focus function works instantly under the following conditions:
When you turn on the power.
When you change the zoom.
When you reposition the projector.
When you change the projection angle.
Enabling Auto Start [Auto Start]
Turns the projector on automatically when the power cable is inserted into an active power outlet. This eliminates
the need to always use the POWER button on the remote control or projector cabinet.
Enabling Power Management [Power Management]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min.,
10min., 20min., 30min.) if there is no signal received by any input.
Enabling Fan Speed Mode [Fan Mode]
This option allows you to select two modes for fan speed: Auto mode and High speed mode.
Auto ....................... The built-in fans automatically run at a variable speed according to the internal temperature.
High ....................... The built-in fans run at a fi xed high speed.
When you wish to cool down the temperature inside the projector quickly, select [High].
NOTE: It is recommended that you select High speed mode if you continue to use the projector for consecutive days.
Selecting Default Source [Default Source Select]
You can set the projector to default to any one of its inputs each time the projector is turned on.
Last ....................... Sets the projector to default to the previous or last active input each time the projector is turned on.
Auto ....................... Searches for an active source in order of Computer → Video → S-Video → Computer and displays the
fi rst found source.
Computer .............. Displays the RGB source (COMPUTER IN) every time the projector is started up.
Video ..................... Displays the Video source (VIDEO IN) every time the projector is started up.
S-Video ................. Displays the Video source (S-VIDEO IN) every time the projector is started up.
•
•
•
•
5. Using On-Screen Menu
[Setup - Options]