NetComm NB714 Network Router User Manual


 
18 NB712 / NB714 User Guide
YML829 Rev1
PPPoE
Step 5: Install the SHDSL Router
Do not turn on the Modem Router until you have completed the Hardware Installation.
Connect the power adapter to the port labelled DC-IN on the rear panel of the product.
Connect the Ethernet cable to the PC.
Note: The 4-port modem router supports auto-MDIX switching, so both straight and
cross-over Ethernet cables can be used.
Connect the phone cable to the product and the other side of the phone cable to the wall jack.
Connect the power adapter to the power source.
Turn on the PC which will be used to configure the Router.
4-port router with network topology
Internet
Firewall
NB714 or NB712
G.SHDSL Modem Router
(
Note: NB714 model shown)
PC PC
PC
PC