NetComm NB714 Network Router User Manual


 
80 NB712 / NB714 User Guide
YML829 Rev1
14 Configuration via Serial Console or Telnet with Menu Driven
Interface
14.1 Serial Console
Check the connectivity of the RS-232 cable from your computer to the serial port of ROUTER. Start your terminal
access program with VT100 terminal emulation. Configure the serial link with the following value:
Parameter Value
Baudrate 9600
Data Bits 8
Parity Check No
Stop Bits 1
Flow-control No
Press the SPACE key until the login screen appears. When you see the login screen, you can logon to Router.
Note: You have to use the SPACE key. Pressing other keys will not work.
User: admin
Password: *****
Note: The factory default user and passwords are both “admin”.
14.2 Telnet
Make sure the correct Ethernet cable is used to connect the LAN port of your computer to the Router. The LAN
LNK indicator on the front panel will glow if the correct cable is used. Start your Telnet client with a VT100
terminal emulation and connect to the management IP of Router. When the login screen appears enter your User
name and Password.
User: admin
Password: *****
Note: The default IP address is 192.168.1.1.