NetComm NB714 Network Router User Manual


 
46 NB712 / NB714 User Guide
YML829 Rev1
Users of the public network outside the company can access only the DMZ host. The DMZ may typically also have
the company’s Web pages so these could serve the outside world. However, the DMZ provides access to no other
company data. In the event that an outside user penetrated the DMZ host’s security, the Web pages might be
corrupted, but no other company information would be exposed.
Press NAT/DMZ to setup the parameters.
If you want to enable the NAT/DMZ functions, click Enable. Enable the DMZ host Function uses the IP address
assigned to the WAN for enabling DMZ functions for the virtual IP address.
Multi-DMZ: Some users who have two or more global IP addresses
assigned by their ISP can be used as a multi DMZ. The
table is for the mapping of global IP address and virtual IP
address.
Multi-NAT: Some of the virtual IP addresses (e.g.: 192.168.1.10
~ 192.168.1.50) collectively use two of the global IP
addresses (e.g.: 69.210.1.9 and 69.210.1.10). The Multi-
NAT table will be setup as;
Virtual Start IP Address: 192.168.1.10
Count: 40
Global Start IP Address: 69.210.1.9
Count: 2
Press Finish to continue.
The screen will display the parameters that will be written to EPROM. Check the parameters before writing to
EPROM. Press Restart to restart the router with new parameters or Continue to configure other parameters.