NetComm NB714 Network Router User Manual


 
NB712 / NB714 User Guide 77
YML829 Rev1
WAN Parameters
VPI: 0
VCI: 32
AAL5 Encap: LLC
Protocol: IPoA , EoA , IPoA + NAT or EoA + NAT
Note: The Protocol used in CO and CPE have to be the same.
Click Next to setup the IP parameters.
Refer to the section NAT/DMZ for more information.
IP Address: 192.168.30.1
Subnet mask: 255.255.255.0
Gateway: 192.169.30.2
Click Next
The screen will display the parameters that will be written to EPROM. Check the parameters before writing to
EPROM.
Press Restart to restart the router with the new parameters or press continue to setup other parameters.