NetComm NP2500 Switch User Manual


 
NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide 7
YML842 Rev1
Features
24×10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports PoE enabled
2 x 1000BASE-T Gigabit Ethernet ports
Compliant with 802.3af specification
Supports PoE power up to 15.4W for each PoE port
Supports PoE power maximum 170W for the device
Supports PoE Powered Device (PD) classification identify
Each port supports auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port
Full-duplex transfer mode for speed of 10Mbps, 100Mbps and 1000Mbps
Half- duplex transfer mode for speed of 10Mbps and 100Mbps
Wire speed reception and transmission
Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity
Up to 4K unicast addresses entities per device, self-learning, and table aging
768KBytes packet buffer
Supports IEEE 802.3x flow control for full-duplex mode ports
Supports Back-pressure flow control for half-duplex mode ports
Supports Port-based VLAN
Supports Port-based Trunking
Supports Port-mirroring
Supports Port-setting for Speed/Disable, Flow control and Port based QoS (Quality of Service)
Easy configuration via Web Browser
Easy setting via Web Management Utility
Standard 19” Rack-mount size