Filter
Top Products
www.netcomm.com.au Rev. 1 - YML675
Page 20 NP5410 Wireless Ethernet Bridge User Guide
The Admin Tab
Device Name: This is the name that the NP5410 will use to identify
itself to external configuration and IP-address-finding
programs. This is not the same as the SSID. It is okay to
leave this blank if you are not using these programs.
IP Address Mode: Select 'DHCP' to get the IP settings from a DHCP server
on your network. Select 'Static' to use the IP settings
specified on this page.
Default IP address: Enter the static IP of ethernet NP5410. The default IP is
“192.168.1.100”.
Default subnet mask: The subnet mask you want to assign for the NP5410.
The default value is “255.255.255.0”.
Default Gateway: The gateway you want to assign for the NP5410. The
default value is “192.168.1.1”.
User name: This is the user name that you must type when logging
in to these web pages.
Administrator password: This is the password that you must type when logging
in to these web pages. You must enter the same
password into both boxes, for confirmation.