Filter
Top Products
Rev.1 - YML655 www.netcomm.com.au
NP6800 - Wireless LAN Access Point Page 21
File Menu
Under this menu you can find the following options:
■ Connect to Access Point - Using this option you can directly connect with the AP.
First, type its IP Address in the panel which appears (Figure 4-2). Then, type the
appropriate password in the Community field (The default password is “public”).
■ Find Access Point - This option allows you to find and connect with an AP without the
necessity of knowing its IP Address. Choose this option in order to find the Aps available
for connection . Select one of the available APs and press “Connect”. Then, the IP of the
selected AP is passed to the IP field of the panel to write the appropriate password at the
community field.
■ Close Connection AP - Terminates the connection with the AP.
■ Exit - Terminates the connection with the AP and exits the application.