Filter
Top Products
www.netcomm.com.au Rev.1 - YML655
Page 22 NP6800 - Wireless LAN Access Point
Setup Menu
As soon as the connection has been established, you are able to start viewing or setting the AP
parameters.
Bridge
Under the “Bridge” submenu, there are two options:
■ IP Configuration
■ Filtering
IP Configuration
Under this window you see and change the followings:
■ The Mac Address, IP Address, and IP Mask of the AP.
Note: The Mac Address can not be altered. This is a unique number that is assigned by
the manufacturer to an Ethernet network device to allow easy identification. The
Mac Address is also printed on a label on the base of the Access Point unit.
■ The option to enable the DHCP client function of the AP.
■ Additionally you have to select the Primary Port, which is the interface that determines the
DHCP server. Also you can select which port (Ethernet and/or Wirless) will be used for the
AP configuration.