Filter
Top Products
Page 19 of 24
15. On the Set Up page, hit the ‘B’ key to select the IP Configuration page.
Figure 3-7. IP Configuration
16. On the IP Configuration page, type in the desired IP Address for this switch, followed by the ‘Enter’ key.
17. Now type in the desired Network Mask, followed by the ‘Enter’ key.
18. Now type in the desired Default Gateway, followed by the ‘Enter’ key.
19. Use Ctrl-W to save these new settings. Hit the ‘Y’ key or ‘Enter’ to confirm saving the new settings to
NVRAM.
The switch will now reset, loading the new IP address. At this point you can use your web browser to
manage your switch through the network. After you have connected your computer to the switch via one of
the network ports, simply launch your web browser and type the IP address in the Address Bar to use the
Graphical User Interface (GUI) for configuration, observation, and management of your switch.