Filter
Top Products
Network Settings
135
Nighthawk X4 AC2350 Smart WiFi Router
To set up the router as an AP:
1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the
other router
.
Cable this port to a LAN port
on another router
2. Launch a web browser from a computer or wireless device that is connected to the network.
3. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
4. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
5. Select ADV
ANCED > Advanced Setup > Wireless AP.
6. Select the Enable AP Mode check box.
7. Scroll down and select an IP address setting:
• Get dynamically from existing router. The other router on the network assigns an
IP address to this router while this router is in AP mode.