Filter
Top Products
space that you specify when you create the LUN.You cannot assign more storage space than the
available nonreserved storage space on the volume.
Default LUN Settings
The following table explains the default settings of a LUN.You can change these settings when you create
or change the LUN.
Table 12. LUN default settings
Default StateItem
DisabledCompression
EnabledContinuous Protection
DailyInterval
ThickProvision
Denied until you set permissionsAccess
Manage LUNs
From the local admin page, you can create, modify, or delete a LUN.
Create a LUN
After you create a volume (see Create and Encrypt a Volume on page 28), you can create LUNs on that
volume. The following procedure describes how to create a LUN from the Shares screen.You can also
create a LUN from the iSCSI screen.
On ReadyNAS 102, 104, and 2120 systems, individual LUNs cannot exceed 8 TB.Note:
To create a LUN:
1. Select Shares > Shares.
A list of shared folders and LUNs on each volume displays.
2. Click the New LUN button to the right of the volume to which you want to add a LUN.
The New LUN pop-up screen displays.
LUNs
86
ReadyNAS OS 6.2