NETGEAR WGR614 v4 Network Router User Manual


 
Reference Manual for the 54 Mbps Wireless Router WGR614 v4
4-4 Content Filtering
December 2003
the application. This information can usually be determined by contacting the publisher of the
application or from user groups of newsgroups.
Enter the Starting Port and Ending Port numbers. If the application uses a single port number, enter
that number in both boxes.
If you know that the application uses either TCP or UDP, select the appropriate protocol. If you are
not sure, select Both.
Configuring Services Blocking by IP Address Range
Under “Filter Services For”, you can block the specified service for a single PC, a range of PCs
(having consecutive IP addresses), or all PCs on your network.
Scheduling When Blocking Will Be Enforced
The WGR614 v4 router allows you to specify when blocking will be enforced. The Schedule menu
is shown below:
Figure 4-4: Schedule menu
Use this check boxes on this menu to create a schedule for blocking content. Click Apply.