Filter
Top Products
12 | Chapter 2: Access Point Discovery
ProSafe 5 AP Wireless Management Software WMS105
For a list of compatible access point models and their supported firmware, see "Access
Point Supported Firmware Versions " in Appendix A.
• If a new NETGEAR access point is not discovered, it might have a MAC address that the
Wireless Management Software does not recognize, though this is not common. See
“Using Discovery OUI” on page 36.
Adding Access Points
After the Wireless Management Software discovers the access points, add them so they can
be managed by the Wireless Management Software.
1. On the Access Point Discovery page, select the access point and click Add.
2. Enter a password for the access point.