Filter
Top Products
8 | Chapter 1: Getting Started
ProSafe 5 AP Wireless Management Software WMS105
Syslog Settings
This page lets you configure the settings to connect to a Syslog server, if you have one
configured in your network. Click the Config tab and select System > Advanced.
• Enable Syslog: Enable the Syslog settings, if you have a Syslog server on your network.
• Syslog Server IP Address: Enter the IP address to which the Wireless Management
Software and managed access points send all SysLogs, if the SysLog option is enabled.
• Server Port Number: Enter the port number at which your Syslog server is configured to
listen to requests. The default port number 514 is filled in when the syslog server is
enabled.