Filter
Top Products
Advanced Settings
105
N600 Wireless Dual Band Gigabit Router Premium Edition WNDR3800
To set up a static route:
1. Select Advanced > Advanced Setup > Static Routes, and click Add to display the
following screen:
2. In the Route Name field, type a name for this static route (for identification purposes only.)
3. Select th
e Private check box if you want to limit access to the LAN only. If Private is
selected, the static route is not reported in RIP.
4. Select th
e Active check box to make this route effective.
5. T
ype the destination IP address of the final destination.
6. T
ype the IP subnet mask for this destination. If the destination is a single host, type
255.255.255.255.
7. T
ype the gateway IP address, which has to be a router on the same LAN segment as the
WNDR3800 router.
8. T
ype a number between 1 and 15 as the metric value.
This value represents the number of routers be
tween your network and the destination.
Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
9. Click App
ly to add the static route.