Filter
Top Products
USB Storage
59
N600 Wireless Dual Band Gigabit Router Premium Edition WNDR3800
USB Storage Advanced Settings
You can set up the device name, workgroups, and network folders for your USB device. On
the Advanced tab, select USB Storage > Advanced Settings to display the following
screen:
You can use this screen to specify access to the USB storage device.
• Netwo
rk Device Name. The default is readyshare. This is the name used to access the
USB device connected to the router.
• Wo
rkgroup. If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here. The name works only in an operating system that supports
NetBIOS, such as Microsoft Windows.
• Access
Method. The access methods are described here.
Network Connection.
Enabled by default, this connection allows all users on the LAN to
have access to the USB drive.
HTTP. Enab
led by default. You can type http://readyshare.routerlogin.net/shares to
access the USB drive.
HTTP (via internet). Disa
bled by default. If you enable this setting, remote users can
type http://public IP address/shares (for example, http://1.1.10.102/shares) or a URL
domain name to access the USB drive over the Internet. This setting supports file
uploading only.
FTP. Disabled by defa
ult.
FTP (via internet). Disabled
by default. If you enable this setting, remote users can
access the USB drive through FTP over the Internet. This setting supports both
downloading and uploading of files.